2011

  •  Campilho, R.D.S.G., Pinto, A.M.G., Banea, M.D., Silva, R.F., da Silva, L.F.M. (2011). Strength improvement of adhesively bonded joints using a reverse-bent geometry. Journal of Adhesion Science and Technology, Vol 25; pp. 2351-2368 (IF=0.992).
  •  Campilho, R.D.S.G., Banea, M.D., Pinto, A.M.G., da Silva, L.F.M., de Jesus, A.M.P. (2011). Strength prediction of single- and double-lap joints by standard and extended finite element modeling. International Journal of Adhesion &Adhesives, Vol.31, pp. 363-372 (IF=1.944).
  •  Cousseau, T., Graça, B., Campos, A., Seabra, J. (2011). Friction torque in grease lubricated thrust ball bearings. Tribology International, (TRIBINT-D-09-00291R1, JTRI 2295), Vol. 44/10, pp. 523-531, doi:10.1016/ j.triboint.2010.06.013 (IF=1.560).
  •  Cousseau T, Graça B, Campos A, Seabra J. (2011). Friction and wear in thrust ball bearings lubricated with biodegradable greases. Proceedings of the Instn. of Mech. Engrs, Part J: Journal of Engineering Tribology (ref JET-S-10-00181- JET), Vol. 225, Nº 77, pp. 627-639 (IF=0.721).
  •  Durão, L.M.P., Gonçalves, D.J.S., Tavares, J.M.R.S., de Albuquerque, V.H., Marques, A.T. (2011). Comparative analysis of drills for composite laminates. Journal of Composite Materials online doi 10.1177/0021998311421690 (IF=0.971).
  •  Gonçalves, J.F., Resende, M.G.C., Mendes, J.J.M. (2011). A biased random-key genetic algorithm with forward-backward improvement for the resource constrained project scheduling problem. Journal of Heuristics, Volume 17, Number 5, pp. 467-486. (IF=1.623).
  •  Martinho, R.P.C.S., Silva, F.J.G., Alexandre, R.J.D., Baptista, A.P.M. (2011). TiB2 Nanostructured Coating for GFRP Injection Moulds. Journal of Nanoscience and Nanotechnology, Vol. 11, pp. 5374–5382 (IF=1.352)
  •  Pinto, A.M.G., Campilho, R.D.S.G., Mendes, I.R., Aires, S.M., Baptista, A.P.M. (2011). Effect of hole drilling at the overlap on the strength of single-lap joints. International Journal of Adhesion & Adhesives, 2011;Vol. 31, pp. 380-387 (IF=1.944).
  •  Silva, F.J.G., Casais, R.C.B., Martinho, R.P.C.S., Baptista, A.P.M. (2011). Role of abrasive material on microabrasion wear tests. Wear, Vol. 271, pp. 2632 – 2639 (IF=1.635).
  •  Silva, F.J.G., Martinho, R.P.C.S., Alexandre, R.J.D., Baptista, A.P.M. (2011). Increasing the wear resistance of molds for injection of glass fiber reinforced plastics. Wear, Vol. 271, pp. 2494 – 2499 (IF=1.635).

2010

  • Campilho RDSG; de Moura MFSF; Pinto AMG; Ramantani DA; Morais JJL; Domingues JJMS - Strength prediction of adhesively-bonded scarf repairs in composite structures under bending. Materials Science Forum, 636-637:233-238 (2010).
  • Campilho RDSG; de Moura MFSF; Barreto AMJP; Morais JJL; Domingues JJMS - Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining. Construction and Building Materials, 24:531-537 (2010). (IF=1,456)
  • Campilho RDSG; de Moura MFSF; Ramantani DA; Morais JJL; Domingues JJMS - Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures. Composites Science and Technology, 70:371-379 (2010). (IF=2,901)
  • Campilho RDSG; de Moura MFSF; Ramantani DA; Morais JJL; Barreto AMJP; Domingues JJMS - Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches. The Journal of Adhesion, 86:649:670 (2010). (IF=0,688)Tiago Cousseau, Beatriz Graça, Armando Campos, Jorge Seabra - Experimental measuring procedure for the friction torque in rolling bearings, Lubrication Science (Ref. LS-09-0029-LS), 2010, Vol22:133-147, (doi: 10.1002/ls.115)
  • Tiago Cousseau, Beatriz Graça, Armando Campos, Jorge Seabra - Influence of grease formulation on thrust bearings power loss, Proceedings of the. Instn of Mech. Engrs, Part J, Journal of Engineering Tribology, 2010, Vol. 224, Nº J9, 935-946, (doi: 10.1243/13506501JET724) (IF=0,630)
  • Luís Miguel Pereira Durão, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, António T. Marques, António G. Magalhães, A. Aguiar Vieira - Tool Effects on Hybrid Laminates Drilling, Materials and Manufacturing Processes, 25, pp 1-6, 2010 (IF=0,968)
  • Luís M. P. Durão, Daniel J. S. Gonçalves, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, A. Torres Marques, A. M. Baptista - Drilling of Carbon Fibre Reinforced Laminates – A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination, Materials Science Forum, vols. 636-637, pp 206-213, 2010
  • Victor Hugo Costa de Albuquerque, João Manuel R. S. Tavares, Luís M. P. Durão - Evaluation of Delamination Damages on Composite Plates from Radiographic Image Processing Using an Artificial Neural Network, Journal of Composite Materials, Vol. 44, nº 9, pp. 1139-1159, 2010 (IF=0,806)
  • Daniel J. S. Gonçalves, Luís Miguel P. Durão, João Manuel R. S. Tavares, Victor Hugo Costa Albuquerque, A. Torres Marques - Evaluation of Tools and Cutting Conditions on Carbon Fibre Reinforced Laminates, Materials Science Forum, Vols. 638-642, pp 944-949, 2010
  • Luís Miguel P. Durão, Daniel J. S. Gonçalves, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, A. Aguiar Vieira, A. Torres Marques - Drilling Tool Geometry Evaluation for Reinforced Composite Laminates, Composite Structures, 92, 1545-1550, 2010 (IF=2,006)
  • Pinto AMG, Magalhães AG, Campilho RDSG, de Moura MFSF, Baptista APM. Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends. Materials Science Forum Vols. 636-637, pp 1157-1164, 2010.
  • Pinto AMG, Magalhães AG, Campilho RDSG, da Silva LFM, Chousal JAG, Baptista APM. Shear modulus and strength of an acrylic adhesive with the notched plate shear method (Arcan) and the thick adherend shear test (TAST). Materials Science Forum Vols. 636-637, pp 787-792, 2010.
  • Campilho RDSG, de Moura MFSF, Pinto AMG, Ramantani DA. Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II. Materials Science Forum, 2010, 636-637: p. 1518-1524.
  • Pinto AMG, Campilho RDSG, de Moura MFSF, Mendes IR. Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures. International Journal of Adhesion & Adhesives, 2010, 30: p. 329–337. (IF=1,853)
  • J. Magalhães-Mendes, “Complex Scheduling Problems Using An Optimization Methodology”, WSEAS TRANSACTIONS on INFORMATION SCIENCE and APPLICATIONS, Issue 2, Volume 7, 2010, pp. 220-229, ISSN: 1790-0832
  • Castro, Ana C.Meira, Silva, F.J.G., Meixedo, J.P., Durão, L. (2010), Acquisition and Data Analysis of the Eco-efficiency for the Establishment of Indicator Parameters for Industrial Environmental Sustainability, In: Putnik, G.D. & Ávila, P. (Eds.), Business Sustainability I: Management, Technology and Learning for Individuals, Organisations and Society in Turbulent Environments. Guimarães: School of Engineering, University of Minho; Porto: ISEP, School of Engineering, Polytechnic of Porto. pp. 91-94. (ISBN  978-989-95907-1-7).

2009

  • Marques, A.T.; Durão, Luís M.P.; Magalhães, António G.; Silva, João F.; Tavares, JMRS - Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill, Composites Science and Technology 69 (2009) pp.2376–2382 (IF=2,53).
  • Morais, AB; Pereira, AB; de Moura, MFSF; Magalhães, António G. - Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test. Composites Science and Technology, Vol.69 (2009) pp.670-676 (IF=2,53).
  • Amaro, A.; Reis, P.; Magalhães, António G.; de Moura, MFSF - The Influence of the Boundary Conditions on Low Velocity Impact Composites Damage. STRAIN, (2009) (IF=1,15).
  • Mendes, J. Magalhães - Uma Metaheurística para a Programação de Projectos com Multi-Modos e Recursos Limitados, IJIE – Iberoamerican Journal of Industrial Engineering, Florianópolis, ISSN 2175-8018, UFSC, Vol.1, nº 1, Junho 2009, pp. 88-105.
  • Mendes, J.J.Magalhães; Gonçalves, J.F.; Resende, M.G.C. - A random key based genetic algorithm for the resource constrained project scheduling problem, Computers & Operations Research, vol. 36 (2009) pp. 92-109 (IF=1,37).
  • Pinto, Arnaldo M.G.;, Magalhães, António G.; Campilho, RDS; de Moura, MFSF; Baptista, APM - Single-Lap Joints of Similar and Dissimilar Adherends Bonded with an Acrylic Adhesive. The Journal of Adhesion, Vol.85, nº 6 (2009) pp.351-376 (IF=1,01).
  • Pinto, Arnaldo M.G.; Magalhães, António G.; Campilho, RDS; da Silva, LFM; Chousal, JAG; Baptista,APM - Shear modulus and strength of an acrylic adhesive with the notched plate method (Arcan) and the thick adherend shear test (TAST). Materials Science Forum, Vol.636-637 (2009) pp.787-792.
  • Silva, Francisco G.; Neto, M.A.; Fernandes, A.J.S.; Costa, F.M.; Oliveira, F.J.; Silva, R.F. – Adhesion and wear behaviour of NCD coatings on Si3N4 by micro-abrasion tests. J. of Nanoscience and Nanotechnology, Vol. 9 (2009) pp. 3939-3943 (IF=1,93).

2007

  • titulo Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model autor R. D. S. G. Campilho, M. F. S. F. de Moura and J. J. M. S. Domingues, revista J. Adhesion Sci. Technol., Vol. 21, No. 9, pp. 855-870 (2007)
  • titulo Using a cohesive damage model to predict the tensile 3 behaviour of CFRP single-strap repairs autor D. S. G. Campilho, M. F. S. F. de Moura and J. J. M. S. Domingues revista International Journal of Solids and Structures, aceite para publicação a 30 October 2007
  • titulo Shear strength of adhesively bonded polyolefins with minimal surface preparation autor A. M. Guedes Pinto, A. G. Magalhães, F. Gomes da Silva, A. P. Monteiro Baptista revista accepted for publication in IJAA
  • titulo The effect of the impactor diameter and boundary conditions on low velocity impact composites behavior autor Amaro, A.M., Reis, P.N.B., Magalhães, A.G., Moura, M.F.S.F. revista Applied Mechanics and Materials, vols 7-8, pp.217-222, 2007
  • titulo A genetic algorithm for the Resource Constrained Multi-Project Scheduling Problem autor José F. Gonçalves, Jorge M. Mendes e Maurício Resende, revista European Journal of Operational Research, 2007, in press.
  • titulo Combustion of slugs of propane and air moving up through an incipiently fluidized bed autor L. Ribeiro, C. Pinho revista Combustion Theory and Modelling, Vol. 11, Nº 3, pág. 401-425, 2007.
  • titulo A simple approach to numerical modelling of propane combustion in fluidized beds autor L. Ribeiro, C. Pinho revista em fase de revisão após apreciação por revisores.
  • titulo Microstructure, mechanical properties and chemical degradationof brazed AISI 316 stainless steel/alumina systems autor O.C. Paiva, M.A. Barbosa, revista Materials Science and Engineering A, disponível on-line, doi:10.1016/j.msea.2007.07.015
  • titulo Numerical prediction of delamination onset in carbon/epoxy composites drilling autor L. M. P. Durão, M. F. S. F. de Moura, A. T. Marques revista Engineering Fracture Mechanics, aceite para publicação em Março de 2007
  • titulo Damage analysis of carbon/epoxy plates after drilling autor Luís Miguel Pereira Durão, João Manuel R. S. Tavares, António Torres Marques, António M. Baptista, António G. Magalhães, revista Int. Journal of Materials and Product Technology, aceite para publicação em Junho de 2007
  • titulo A random key based genetic algorithm for the resource constrained project scheduling problem, autor J.J.M. Mendes, J.F. Gonçalves and M.G.C. Resende revista Computers & Operations Research, In Press, Corrected Proof, Available online 25 July 2007

2006 E ANTERIORES

  • titulo Simulation of mechanical behaviour of composite bonded joints containing strip defects autor M.F.S.F de Moura [1], R. Daniaud [1], A.G.Magalhães [2] [1] Faculdade de Engenharia da Universidade do Porto, [2] Instituto Superior de Engenharia do Porto revista International journal of Adhesion & Adhesives, 26, pp.464-473, 2006.
  • titulo Non-newtonian thermal analysis of an EHD contact lubricated with MIL-L 23699 oil autor Campos (1), A. Sottomayor (1), J. Seabra (2) Instituto Superior de Engenharia, Instituto Politécnico do Porto, (2) Faculdade de Engenharia da Universidade do Porto revista Tribology International, Volume 39, Issue 12, December 2006, Pages 1732-1744 (doi:10.1016/j.triboint.2006.01.006)
  • titulo Consolidation of glass fibre‑polypropylene towpregs by compression moulding autor Silva, J. F [1],., Nunes, J. P [2],, Marques, A. T [3], [1] Dep. Eng. Mecânica, ISEP, Porto, Portugal, [2] Dep. Eng. Polímeros, Universidade do Minho, Guimarães, Portugal, [3] Departamento de Engenharia Mecânica e Gestão Industrial da Faculdade de Engenharia da Universidade do Porto, Portugal revista Advanced Materials Forum III, Vol. 514-516, Trans. Tech. Publications, 2006
  • titulo Development of gf/pp towpreg woven fabrics for composite reinforcements autor Raul Fangueiro [1], João Pedro Nunes [2], João Silva [3],, Mário Araújo[1],, Fernando Novais [1], [1] Departamento de Engenharia Têxtil, Universidade do Minho, Portugal, [2] Dep. Eng. Polímeros, Universidade do Minho, Guimarães, Portugal, [3] Dep. Eng. Mecânica, ISEP, Porto, Portugal revista Advanced Materials Forum III, Vol. 514-516, Trans. Tech. Publications, 2006
  • titulo Combustion of slugs of propane and air moving up through an incipiently fluidized bed autor Leonardo José da Silva Ribeiro [1], Carlos Manuel Tavares de Pinho [2]. [1] Departamento de Mecânica, ISEP, [2] Departamento de Mecânica, FEUP. revista Combustion Theory and Modelling. Aceite para publicação
  • titulo Numerical simulation of the drilling process on carbon/epoxy composite laminates autor L. M. P. Durão [1], M. F. S. F. de Moura [2], A. T. Marques [2] [1] Dep. de Engenharia Mecânica, CIDEM, ISEP, [2] DEMEGI, FEUP revista Composites Part A, 37, 1325-1333, 2006
  • titulo A branch-and-price algorithm for scheduling parallel machines with sequence dependent setup times autor Manuel Pereira Lopes [1], Valério de Carvalho [2] [1] Departamento Engª Mecânica, ISEP; [2] Departamento de Produção e Sistemas, UM. revista European Journal of Operational Research, 176 (3) pp. 1508-1527.
  • titulo Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems autor O.C. Paiva [1], M.A. Barbosa [2] [1] Departamento Engª Mecânica, ISEP; [2] FEUP. revista Materials Science & Engineering. Submetido.
  • titulo Ion implantation of titanium on polycrystalline alumina as pre-treatment aimed to improve the mechanical performance of Ti/AL2O3 brazed joints autor O.C. Paiva [1], M.F. da Silva [2], J.C. Soares [2], M.A. Barbosa [2] [1] Departamento Engª Mecânica, ISEP; [2] FEUP. revista Applied Surface Science. Submetido.
  • titulo Virtual Enterprises’ Extended Lifecycle autor Cunha M. M., Putnik G. D., Ávila P. revista MANAGEMENT, Faculty of Organizational Sciences – Belgrade, Vol 9, No. 34, p. 4-13, 2005
  • titulo Application of acoustic emission to study creep behaviour of composite bonded lap shear joints autor A.G.Magalhães, M.F.S.F. de Moura revista NDT&E international, 38, pp.45-52, 2005
  • titulo Analyses of the Resources System Selection Algorithms for Agile/Virtual Enterprises Integration Through Genetic Algorithms autor Ávila P., Putnik G., Madureira, A. revista WSEAS Transactions on Informations Science and Aplications, Vol 2, No. 5, p. 592-599, 2005
  • titulo Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials autor A.G.Magalhães, M.F.S.F. de Moura revista International journal of Adhesion & Adhesives, 25, pp.313-319, 2005
  • titulo Mode I interlaminar fracture of woven glass/epoxy multidirectional laminates autor A.B.Pereira, A.B.de Morais, M.F.S.F. de Moura, A.G.Magalhães revista Composites Part A, Elsevier, 2005
  • titulo Simulation of Mechanical Behaviour of Composite Bonded Joints Containing Strip Defects autor M.F.S.F de Moura, A.G.Magalhães revista International journal of Adhesion & Adhesives, 2005
  • titulo Numerical Simulation of The Drilling Process On Carbon/Epoxy Composite Laminates autor L.M.P. Durão, M.F.S.F. de Moura, A.T. Marques revista Composites, Part A, 2005. aceite para publicação
  • titulo Maquinagem de Compósitos de Matriz Polimérica autor L.M.P. Durão, António Torres Marques, António G. Magalhães, António Monteiro Baptista revista Revista Iberoamericana de Ingenieria Mecânica, 2005. aceite para publicação
  • titulo A hybrid genetic algorithm for the job shop scheduling problem autor Gonçalves, J.F., Mendes, J.J.M., Resende, Maurício G.C. revista European Journal of Operational Research, Vol. 167, pp. 77-95, 2005
  • titulo A Random Key Based Genetic Algorithm for the Resource Constrained Project Scheduling Problem autor Mendes, J.J.M., Gonçalves, J.F., Resende, Maurício G.C revista AT&T Labs Research Technical Report TD-6DUK2C USA, June 30, 2005
  • titulo A SATEC no CIDEM / ISEP / IPP autor José Abel Andrade revista CLIMATIZAÇÃO, nº 39, ano VI, pp 48-54. 2005
  • titulo Modelling single and double-lap repairs on composite materials autor R. D. S. G. Campilho, M. F. S. F. de Moura, J. J. M. S. Domingues revista Composites Science and Tecnology, nº 65 pp 1948-1958, (2005).
  • titulo Consolidation of GlassFiber‑Polypropylene Towpregs by Compression Moulding autor Silva, J. F., Nunes, J. P, Marques, A. T revista aceite para publicação em Advanced Materials Forum III.
  • titulo Development of GF/PP Towpreg Woven Fabrics for Composite Reinforcements autor Raul Fangueiro, João Pedro Nunes, João Silva, Mário Araújo, Fernando Novais revista aceite para publicação em Advanced Materials Forum III
  • titulo Impact fracture study of epoxy-based composites with aluminium particles and milled fibres autor P.V. Vasconcelos, F.J.Lino, A.Magalhães, R.J.L.Neto revista journal of Materials Processing Technology, 170, pp.277-283, 2005
  • titulo Generic behaviour of propane combustion in fluidized beds autor Ribeiro, L., Pinho, C. revista Chemical Engineering Research and Design, 82(A12), pág. 1597-1603, 2004
  • titulo Advances In Thermoplastic Matrix Towpreg Processing autor Nunes, J. P., Silva, J. F., Marques, A. T., Van Hattum; F. W. J. Bernardo, C. A. revista Journal of Thermoplastic Composite Materials, 17 (6), 2004
  • titulo “A pressurizing System for Long-term Study of Marine or Freshwater Organisms Enabling the Simulation of Cyclic Vertical Migrations” autor Damasceno, A., Gonçalves, J., Silva, J. and Coimbra, J. revista Scientia Marina, 68 (4), 2004.
  • titulo Corrosion behavior of Ti/Al2O3 interfaces produced by an active metal brazing methodology autor E. Ariza, L.A. Rocha, O.C. Paiva revista Materials Science (submetido)
  • titulo Production of Powder Coated Towpregs and Composites autor João Silva, A. Torres Marques, N. Crainic, S. Cabral revista Journal of Thermoplastic Composite Material 16, 231-248, 2003
  • titulo Production of Powder Coated Towpregs and Composites autor J. P. M. Gonçalves, M.F.S.F. Moura , A.G. Magalhães, P.M.S.T. Castro revista Fatigue & Fracture of Engineering Materials & Structures, vol.26. 2003, pp. 479-486