2011

  •  Campilho, R.D.S.G., Pinto, A.M.G., Banea, M.D., Silva, R.F., da Silva, L.F.M. (2011). Strength improvement of adhesively bonded joints using a reverse-bent geometry. Journal of Adhesion Science and Technology, Vol 25; pp. 2351-2368 (IF=0.992).
  •  Campilho, R.D.S.G., Banea, M.D., Pinto, A.M.G., da Silva, L.F.M., de Jesus, A.M.P. (2011). Strength prediction of single- and double-lap joints by standard and extended finite element modeling. International Journal of Adhesion &Adhesives, Vol.31, pp. 363-372 (IF=1.944).
  •  Cousseau, T., Graça, B., Campos, A., Seabra, J. (2011). Friction torque in grease lubricated thrust ball bearings. Tribology International, (TRIBINT-D-09-00291R1, JTRI 2295), Vol. 44/10, pp. 523-531, doi:10.1016/ j.triboint.2010.06.013 (IF=1.560).
  •  Cousseau T, Graça B, Campos A, Seabra J. (2011). Friction and wear in thrust ball bearings lubricated with biodegradable greases. Proceedings of the Instn. of Mech. Engrs, Part J: Journal of Engineering Tribology (ref JET-S-10-00181- JET), Vol. 225, Nº 77, pp. 627-639 (IF=0.721).
  •  Durão, L.M.P., Gonçalves, D.J.S., Tavares, J.M.R.S., de Albuquerque, V.H., Marques, A.T. (2011). Comparative analysis of drills for composite laminates. Journal of Composite Materials online doi 10.1177/0021998311421690 (IF=0.971).
  •  Gonçalves, J.F., Resende, M.G.C., Mendes, J.J.M. (2011). A biased random-key genetic algorithm with forward-backward improvement for the resource constrained project scheduling problem. Journal of Heuristics, Volume 17, Number 5, pp. 467-486. (IF=1.623).
  •  Martinho, R.P.C.S., Silva, F.J.G., Alexandre, R.J.D., Baptista, A.P.M. (2011). TiB2 Nanostructured Coating for GFRP Injection Moulds. Journal of Nanoscience and Nanotechnology, Vol. 11, pp. 5374–5382 (IF=1.352)
  •  Pinto, A.M.G., Campilho, R.D.S.G., Mendes, I.R., Aires, S.M., Baptista, A.P.M. (2011). Effect of hole drilling at the overlap on the strength of single-lap joints. International Journal of Adhesion & Adhesives, 2011;Vol. 31, pp. 380-387 (IF=1.944).
  •  Silva, F.J.G., Casais, R.C.B., Martinho, R.P.C.S., Baptista, A.P.M. (2011). Role of abrasive material on microabrasion wear tests. Wear, Vol. 271, pp. 2632 – 2639 (IF=1.635).
  •  Silva, F.J.G., Martinho, R.P.C.S., Alexandre, R.J.D., Baptista, A.P.M. (2011). Increasing the wear resistance of molds for injection of glass fiber reinforced plastics. Wear, Vol. 271, pp. 2494 – 2499 (IF=1.635).

2010

  • Campilho RDSG; de Moura MFSF; Pinto AMG; Ramantani DA; Morais JJL; Domingues JJMS - Strength prediction of adhesively-bonded scarf repairs in composite structures under bending. Materials Science Forum, 636-637:233-238 (2010).
  • Campilho RDSG; de Moura MFSF; Barreto AMJP; Morais JJL; Domingues JJMS - Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining. Construction and Building Materials, 24:531-537 (2010). (IF=1,456)
  • Campilho RDSG; de Moura MFSF; Ramantani DA; Morais JJL; Domingues JJMS - Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures. Composites Science and Technology, 70:371-379 (2010). (IF=2,901)
  • Campilho RDSG; de Moura MFSF; Ramantani DA; Morais JJL; Barreto AMJP; Domingues JJMS - Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches. The Journal of Adhesion, 86:649:670 (2010). (IF=0,688)Tiago Cousseau, Beatriz Graça, Armando Campos, Jorge Seabra - Experimental measuring procedure for the friction torque in rolling bearings, Lubrication Science (Ref. LS-09-0029-LS), 2010, Vol22:133-147, (doi: 10.1002/ls.115)
  • Tiago Cousseau, Beatriz Graça, Armando Campos, Jorge Seabra - Influence of grease formulation on thrust bearings power loss, Proceedings of the. Instn of Mech. Engrs, Part J, Journal of Engineering Tribology, 2010, Vol. 224, Nº J9, 935-946, (doi: 10.1243/13506501JET724) (IF=0,630)
  • Luís Miguel Pereira Durão, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, António T. Marques, António G. Magalhães, A. Aguiar Vieira - Tool Effects on Hybrid Laminates Drilling, Materials and Manufacturing Processes, 25, pp 1-6, 2010 (IF=0,968)
  • Luís M. P. Durão, Daniel J. S. Gonçalves, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, A. Torres Marques, A. M. Baptista - Drilling of Carbon Fibre Reinforced Laminates – A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination, Materials Science Forum, vols. 636-637, pp 206-213, 2010
  • Victor Hugo Costa de Albuquerque, João Manuel R. S. Tavares, Luís M. P. Durão - Evaluation of Delamination Damages on Composite Plates from Radiographic Image Processing Using an Artificial Neural Network, Journal of Composite Materials, Vol. 44, nº 9, pp. 1139-1159, 2010 (IF=0,806)
  • Daniel J. S. Gonçalves, Luís Miguel P. Durão, João Manuel R. S. Tavares, Victor Hugo Costa Albuquerque, A. Torres Marques - Evaluation of Tools and Cutting Conditions on Carbon Fibre Reinforced Laminates, Materials Science Forum, Vols. 638-642, pp 944-949, 2010
  • Luís Miguel P. Durão, Daniel J. S. Gonçalves, João Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, A. Aguiar Vieira, A. Torres Marques - Drilling Tool Geometry Evaluation for Reinforced Composite Laminates, Composite Structures, 92, 1545-1550, 2010 (IF=2,006)
  • Pinto AMG, Magalhães AG, Campilho RDSG, de Moura MFSF, Baptista APM. Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends. Materials Science Forum Vols. 636-637, pp 1157-1164, 2010.
  • Pinto AMG, Magalhães AG, Campilho RDSG, da Silva LFM, Chousal JAG, Baptista APM. Shear modulus and strength of an acrylic adhesive with the notched plate shear method (Arcan) and the thick adherend shear test (TAST). Materials Science Forum Vols. 636-637, pp 787-792, 2010.
  • Campilho RDSG, de Moura MFSF, Pinto AMG, Ramantani DA. Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II. Materials Science Forum, 2010, 636-637: p. 1518-1524.
  • Pinto AMG, Campilho RDSG, de Moura MFSF, Mendes IR. Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures. International Journal of Adhesion & Adhesives, 2010, 30: p. 329–337. (IF=1,853)
  • J. Magalhães-Mendes, “Complex Scheduling Problems Using An Optimization Methodology”, WSEAS TRANSACTIONS on INFORMATION SCIENCE and APPLICATIONS, Issue 2, Volume 7, 2010, pp. 220-229, ISSN: 1790-0832
  • Castro, Ana C.Meira, Silva, F.J.G., Meixedo, J.P., Durão, L. (2010), Acquisition and Data Analysis of the Eco-efficiency for the Establishment of Indicator Parameters for Industrial Environmental Sustainability, In: Putnik, G.D. & Ávila, P. (Eds.), Business Sustainability I: Management, Technology and Learning for Individuals, Organisations and Society in Turbulent Environments. Guimarães: School of Engineering, University of Minho; Porto: ISEP, School of Engineering, Polytechnic of Porto. pp. 91-94. (ISBN  978-989-95907-1-7).

2009

  • Marques, A.T.; Durão, Luís M.P.; Magalhães, António G.; Silva, João F.; Tavares, JMRS - Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill, Composites Science and Technology 69 (2009) pp.2376–2382 (IF=2,53).
  • Morais, AB; Pereira, AB; de Moura, MFSF; Magalhães, António G. - Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test. Composites Science and Technology, Vol.69 (2009) pp.670-676 (IF=2,53).
  • Amaro, A.; Reis, P.; Magalhães, António G.; de Moura, MFSF - The Influence of the Boundary Conditions on Low Velocity Impact Composites Damage. STRAIN, (2009) (IF=1,15).
  • Mendes, J. Magalhães - Uma Metaheurística para a Programação de Projectos com Multi-Modos e Recursos Limitados, IJIE – Iberoamerican Journal of Industrial Engineering, Florianópolis, ISSN 2175-8018, UFSC, Vol.1, nº 1, Junho 2009, pp. 88-105.
  • Mendes, J.J.Magalhães; Gonçalves, J.F.; Resende, M.G.C. - A random key based genetic algorithm for the resource constrained project scheduling problem, Computers & Operations Research, vol. 36 (2009) pp. 92-109 (IF=1,37).
  • Pinto, Arnaldo M.G.;, Magalhães, António G.; Campilho, RDS; de Moura, MFSF; Baptista, APM - Single-Lap Joints of Similar and Dissimilar Adherends Bonded with an Acrylic Adhesive. The Journal of Adhesion, Vol.85, nº 6 (2009) pp.351-376 (IF=1,01).
  • Pinto, Arnaldo M.G.; Magalhães, António G.; Campilho, RDS; da Silva, LFM; Chousal, JAG; Baptista,APM - Shear modulus and strength of an acrylic adhesive with the notched plate method (Arcan) and the thick adherend shear test (TAST). Materials Science Forum, Vol.636-637 (2009) pp.787-792.
  • Silva, Francisco G.; Neto, M.A.; Fernandes, A.J.S.; Costa, F.M.; Oliveira, F.J.; Silva, R.F. – Adhesion and wear behaviour of NCD coatings on Si3N4 by micro-abrasion tests. J. of Nanoscience and Nanotechnology, Vol. 9 (2009) pp. 3939-3943 (IF=1,93).

2007

  • title Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model autor R. D. S. G. Campilho, M. F. S. F. de Moura and J. J. M. S. Domingues, revista J. Adhesion Sci. Technol., Vol. 21, No. 9, pp. 855-870 (2007)
  • title Using a cohesive damage model to predict the tensile 3 behaviour of CFRP single-strap repairs author D. S. G. Campilho, M. F. S. F. de Moura and J. J. M. S. Domingues revista International Journal of Solids and Structures, acepted for publication at 30 October 2007
  • title Shear strength of adhesively bonded polyolefins with minimal surface preparation author A. M. Guedes Pinto, A. G. Magalhães, F. Gomes da Silva, A. P. Monteiro Baptista journal accepted for publication in IJAA
  • title The effect of the impactor diameter and boundary conditions on low velocity impact composites behavior author Amaro, A.M., Reis, P.N.B., Magalhães, A.G., Moura, M.F.S.F. journal Applied Mechanics and Materials, vols 7-8, pp.217-222, 2007
  • title A genetic algorithm for the Resource Constrained Multi-Project Scheduling Problem autor José F. Gonçalves, Jorge M. Mendes e Maurício Resende, journal European Journal of Operational Research, 2007, in press.
  • title Combustion of slugs of propane and air moving up through an incipiently fluidized bed author L. Ribeiro, C. Pinho journal Combustion Theory and Modelling, Vol. 11, Nº 3, pág. 401-425, 2007.
  • title A simple approach to numerical modelling of propane combustion in fluidized beds autor L. Ribeiro, C. Pinho journal in revision after reviewers appreciation.
  • title Microstructure, mechanical properties and chemical degradationof brazed AISI 316 stainless steel/alumina systems author O.C. Paiva, M.A. Barbosa, journal Materials Science and Engineering A, available on-line, doi:10.1016/j.msea.2007.07.015
  • title Numerical prediction of delamination onset in carbon/epoxy composites drilling author L. M. P. Durão, M. F. S. F. de Moura, A. T. Marques journal Engineering Fracture Mechanics, accepted for publication in March 2007
  • title Damage analysis of carbon/epoxy plates after drilling author Luís Miguel Pereira Durão, João Manuel R. S. Tavares, António Torres Marques, António M. Baptista, António G. Magalhães, Int. Journal of Materials and Product Technology, accepted for publication in June 2007
  • title A random key based genetic algorithm for the resource constrained project scheduling problem, author J.J.M. Mendes, J.F. Gonçalves and M.G.C. Resende journal Computers & Operations Research, In Press, Corrected Proof, Available online 25 July 2007

2006 AND PREVIOUS

  • title Simulation of mechanical behaviour of composite bonded joints containing strip defects author M.F.S.F de Moura [1], R. Daniaud [1], A.G.Magalhães [2] [1] Faculdade de Engenharia da Universidade do Porto, [2] Instituto Superior de Engenharia do Porto revista International journal of Adhesion & Adhesives, 26, pp.464-473, 2006.
  • title Non-newtonian thermal analysis of an EHD contact lubricated with MIL-L 23699 oil author Campos (1), A. Sottomayor (1), J. Seabra (2) Instituto Superior de Engenharia, Instituto Politécnico do Porto, (2) Faculdade de Engenharia da Universidade do Porto journal Tribology International, Volume 39, Issue 12, December 2006, Pages 1732-1744 (doi:10.1016/j.triboint.2006.01.006)
  • title Consolidation of glass fibre‑polypropylene towpregs by compression moulding author Silva, J. F [1],., Nunes, J. P [2],, Marques, A. T [3], [1] Dep. Eng. Mecânica, ISEP, Porto, Portugal, [2] Dep. Eng. Polímeros, Universidade do Minho, Guimarães, Portugal, [3] Departamento de Engenharia Mecânica e Gestão Industrial da Faculdade de Engenharia da Universidade do Porto, Portugal journal Advanced Materials Forum III, Vol. 514-516, Trans. Tech. Publications, 2006
  • title Development of gf/pp towpreg woven fabrics for composite reinforcements author Raul Fangueiro [1], João Pedro Nunes [2], João Silva [3],, Mário Araújo[1],, Fernando Novais [1], [1] Departamento de Engenharia Têxtil, Universidade do Minho, Portugal, [2] Dep. Eng. Polímeros, Universidade do Minho, Guimarães, Portugal, [3] Dep. Eng. Mecânica, ISEP, Porto, Portugal journal Advanced Materials Forum III, Vol. 514-516, Trans. Tech. Publications, 2006
  • title Combustion of slugs of propane and air moving up through an incipiently fluidized bed author Leonardo José da Silva Ribeiro [1], Carlos Manuel Tavares de Pinho [2]. [1] Departamento de Mecânica, ISEP, [2] Departamento de Mecânica, FEUP. jornal Combustion Theory and Modelling. Accepted for publication
  • title Numerical simulation of the drilling process on carbon/epoxy composite laminates author L. M. P. Durão [1], M. F. S. F. de Moura [2], A. T. Marques [2] [1] Dep. de Engenharia Mecânica, CIDEM, ISEP, [2] DEMEGI, FEUP journal Composites Part A, 37, 1325-1333, 2006
  • title A branch-and-price algorithm for scheduling parallel machines with sequence dependent setup times author Manuel Pereira Lopes [1], Valério de Carvalho [2] [1] Departamento Engª Mecânica, ISEP; [2] Departamento de Produção e Sistemas, UM. journal European Journal of Operational Research, 176 (3) pp. 1508-1527.
  • title Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems author O.C. Paiva [1], M.A. Barbosa [2] [1] Departamento Engª Mecânica, ISEP; [2] FEUP. journal Materials Science & Engineering. Submetido.
  • title Ion implantation of titanium on polycrystalline alumina as pre-treatment aimed to improve the mechanical performance of Ti/AL2O3 brazed joints author O.C. Paiva [1], M.F. da Silva [2], J.C. Soares [2], M.A. Barbosa [2] [1] Departamento Engª Mecânica, ISEP; [2] FEUP. journal Applied Surface Science. Submitted.
  • title Virtual Enterprises’ Extended Lifecycle author Cunha M. M., Putnik G. D., Ávila P. journal MANAGEMENT, Faculty of Organizational Sciences – Belgrade, Vol 9, No. 34, p. 4-13, 2005
  • title Application of acoustic emission to study creep behaviour of composite bonded lap shear joints author A.G.Magalhães, M.F.S.F. de Moura journal NDT&E international, 38, pp.45-52, 2005
  • title Analyses of the Resources System Selection Algorithms for Agile/Virtual Enterprises Integration Through Genetic Algorithms author Ávila P., Putnik G., Madureira, A. journal WSEAS Transactions on Informations Science and Aplications, Vol 2, No. 5, p. 592-599, 2005
  • title Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials author A.G.Magalhães, M.F.S.F. de Moura International journal of Adhesion & Adhesives, 25, pp.313-319, 2005
  • title Mode I interlaminar fracture of woven glass/epoxy multidirectional laminates auhtor A.B.Pereira, A.B.de Morais, M.F.S.F. de Moura, A.G.Magalhães journal Composites Part A, Elsevier, 2005
  • title Simulation of Mechanical Behaviour of Composite Bonded Joints Containing Strip Defects author M.F.S.F de Moura, A.G.Magalhães International journal of Adhesion & Adhesives, 2005
  • title Numerical Simulation of The Drilling Process On Carbon/Epoxy Composite Laminates author L.M.P. Durão, M.F.S.F. de Moura, A.T. Marques journal Composites, Part A, 2005. accepted for publication
  • title Maquinagem de Compósitos de Matriz Polimérica author L.M.P. Durão, António Torres Marques, António G. Magalhães, António Monteiro Baptista journal Revista Iberoamericana de Ingenieria Mecânica, 2005. accepted for publication
  • title A hybrid genetic algorithm for the job shop scheduling problem author Gonçalves, J.F., Mendes, J.J.M., Resende, Maurício G.C. journal European Journal of Operational Research, Vol. 167, pp. 77-95, 2005
  • title A Random Key Based Genetic Algorithm for the Resource Constrained Project Scheduling Problem author Mendes, J.J.M., Gonçalves, J.F., Resende, Maurício G.C journal AT&T Labs Research Technical Report TD-6DUK2C USA, June 30, 2005
  • title A SATEC no CIDEM / ISEP / IPP autor José Abel Andrade journal CLIMATIZAÇÃO, nº 39, ano VI, pp 48-54. 2005
  • title Modelling single and double-lap repairs on composite materials author R. D. S. G. Campilho, M. F. S. F. de Moura, J. J. M. S. Domingues journal Composites Science and Tecnology, nº 65 pp 1948-1958, (2005).
  • title Consolidation of GlassFiber‑Polypropylene Towpregs by Compression Moulding author Silva, J. F., Nunes, J. P, Marques, A. T journal accepted for publication in Advanced Materials Forum III.
  • title Development of GF/PP Towpreg Woven Fabrics for Composite Reinforcements autor Raul Fangueiro, João Pedro Nunes, João Silva, Mário Araújo, Fernando Novais journal accepted for publication in Advanced Materials Forum III
  • title Impact fracture study of epoxy-based composites with aluminium particles and milled fibres author P.V. Vasconcelos, F.J.Lino, A.Magalhães, R.J.L.Neto journal of Materials Processing Technology, 170, pp.277-283, 2005
  • titleGeneric behaviour of propane combustion in fluidized beds author Ribeiro, L., Pinho, C. journal Chemical Engineering Research and Design, 82(A12), pág. 1597-1603, 2004
  • title Advances In Thermoplastic Matrix Towpreg Processing author Nunes, J. P., Silva, J. F., Marques, A. T., Van Hattum; F. W. J. Bernardo, C. A. Journal of Thermoplastic Composite Materials, 17 (6), 2004
  • title “A pressurizing System for Long-term Study of Marine or Freshwater Organisms Enabling the Simulation of Cyclic Vertical Migrations” author Damasceno, A., Gonçalves, J., Silva, J. and Coimbra, J. journal Scientia Marina, 68 (4), 2004.
  • title Corrosion behavior of Ti/Al2O3 interfaces produced by an active metal brazing methodology author E. Ariza, L.A. Rocha, O.C. Paiva journal Materials Science (submitted)
  • title Production of Powder Coated Towpregs and Composites author João Silva, A. Torres Marques, N. Crainic, S. Cabral Journal of Thermoplastic Composite Material 16, 231-248, 2003
  • title Production of Powder Coated Towpregs and Composites author J. P. M. Gonçalves, M.F.S.F. Moura , A.G. Magalhães, P.M.S.T. Castro journalFatigue & Fracture of Engineering Materials & Structures, vol.26. 2003, pp. 479-486